Lining with Pipes
This module focuses on the theoretical background and the practical conditions to be observed on the subject of welding of polyethylene pipes for gas, water and wastewater pipelines. A further focus is on the requirements to be considered in quality assurance and in particular the consequences of non-compliance.
LEARNING OUTCOMES
- Process steps of plastic welding;
- Consequences of non-professional plastic welding work;
- Necessary quality assurance measures.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006
The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through material production and installation, right up to checking the quality achieved. It is characterized by a wide range of applications and a high variance in the fabrication and application processes.
This module teaches the essential basics in relation to the fabrication of the lining tube and its installation.
LEARNING OUTCOMES
- Knowing range of application of tube lining
- Identifyinfg damage patterns and application limits;
- Knowing requirements on materials, resin systems and carrier material;
- Awareness of curing processes and procedures.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022
The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an assured standard construction method, starting with the planning process, through the production of materials, the installation, right up to checking the quality achieved. It is characterised by a wide range of applications and a high variance in the fabrication and application processes. This module teaches essential basics with regard to the required finishing work including the taking of samples, their testing for the acceptance of the rehabilitation performance and gives an overview of rehabilitation defects and their handling.
This module requires knowledge of the modules “Lining with cured-in-place pipes - Basics” and " - Processes” as a prerequisite.
LEARNING OUTCOMES
- knowing procedures and process steps for connecting the CIPP liner to manholes and structures and lateral pipes;
- quality influences during installation and
- required tests for approving the professional installation of the CIPP liner.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2023
The lecture describes the different method variants and systems of lining with prefabricated pipes with annular space especially the lining with continuous and discrete pipes.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2009)
The lecture describes the two different method variants, deformation process and reduction process, as well as their areas and limits of application.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2009)
The lecture deals with the method variants and the application areas of lining with spirally-wound pipes.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2009
The “lining with spirally-wound pipes” process is assigned to the group of lining processes with locally produced pipes. The characteristic of this method is the production of a spirally formed self-supporting or static load-bearing liner on-site, from factory-made extruded plastic profiles with the help of a winding machine.
LEARNING OUTCOMES
- Areas and limits of application
- Materials and profiles;
- Requirements for planning and work preparation;
- Work sequence for lining with spirally-wound pipes with stationary coiling machine in the launch shaft;
- Requirements and the sequence for annular space grouting;
- Requirements for quality assurance.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2023
The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through material production and installation, right up to checking the quality achieved. It is characterized by a wide range of applications and a high variance in the fabrication and application processes. This module teaches the essential basics in relation to the fabrication of the lining tube and its installation.
LEARNING OUTCOMES
- wall construction of the lining tube;
- possible uses and applications of CIPP liner;
- preparatory work, installation variants and the curing process;
- advantages and disadvantages of the various curing methods and requirements for structural verifications.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022
The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through the production of materials and installation, right up to checking the quality achieved. It is characterised by a wide range of applications and a high variance in the fabrication and application processes. This module gives a detailed overview of the installation and curing processes in lining tube. Thus, this module creates the basis for an optimal process selection within the planning process and provides essential basic knowledge for construction supervision.
This module requires knowledge of the module "Lining with cured-in-place pipes – Basics".
LEARNING OUTCOMES
- wall construction of the lining tube;
- possible uses and applications of CIPP liner;
- preparatory work, installation variants and the curing process;
- advantages and disadvantages of the various curing methods and requirements for structural verifications.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022
The module "Details on the Installation of Lining with UV Cured-in-Place Pipes” is based on the ordering and installation manual SAERTEX-LINER® for gravity pipes and sewers by SAERTEX multiCom GmbH. This module describes the essential work steps, starting with site preparation, continuing with the installation of the lining tube, the curing and, finally, the essential finishing work.
Note: Specific numerical values in this module apply to products from SAERTEX multiCom GmbH and are not readily transferable to products from other manufacturers.
LEARNING OUTCOMES
- The curing of the lining tube with regard to logging, working pressure, positioning of the light source, ignition schemes for various UV light sources;
- Requirements for special rehabilitation conditions, such as special profiles, bends, and nominal diameter changes
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH in cooperation with SAERTEX multiCom GmbH / 2023
This module deals with the basic principles of lining with continuous pipe processes, as well as their terminological definitions, limiting conditions, and areas of application.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)
Course name Renovation: Lining with Continuous Pipes - Part III - Method Variants with Annular Space
This module introduces the method variants of lining with continuous pipes with annular space.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)
This module introduces the method variants of lining with continuous pipes without annular space (close-fit).
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)
This module deals with the quality assurance of lining with continuous pipes, both with and without annular space.
Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)