Tag - Replacement | elearning

Course name NA-08 - Replacement: Pipe Bursting – Basics

Replacement of supply and disposal pipelines (gas, water, wastewater) means the construction of new pipelines in the same alignment, whereby the new installations incorporate the function of the original pipeline.

This module covers the pipe bursting replacement technique associated with the trenchless construction method.

LEARNING OUTCOMES

Rules and regulations;
Pipe bursting methods, their areas and limits of application and their advantages and disadvantages;
Selection of suitable pipe bursting methods depending on pipe defects and boundary conditions.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH in cooperation with Trenchless Technology Center / 2016

Replacement - Trenchless

Get access

Course name NA-08 - Replacement: Pulling-In the Pipe String during the Pipe Bursting Process

This module focuses on the parameters that must be considered when pulling in the pipe string for gas, water and wastewater pipelines. In addition to a basic description of the replacement procedure, the importance of tensile forces, bending radii, and the dimensioning of the excavation pit is therefore the focus of attention.

LEARNING OUTCOMES

Maximum permissible tensile forces;
Elongations and compressions of the product pipe due to the pulling-in process;
Determination of the minimum excavation pit length and
Required material properties of plastic pipes.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH in cooperation with Trenchless Technology Center / 2016

Replacement - Trenchless

Get access

Course name Trenchless 101 - Part V - Replacement

This lecture is part of the series "Trenchless 101" and serves to provide an overview of trenchless replacement methods for gas, water and wastewater pipelines.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

Replacement - Trenchless

Get access

Course name Replacement by Trenchless Method – Guidelines for Impact Moling

LEARNING OUTCOMES

Publisher: Trenchless Technology Center (TTC), Editorial: R. Sterling (2006)

Replacement by Trenchless Method

Get access

Course name Replacement by Trenchless Method – Guidelines for Pipe Bursting

LEARNING OUTCOMES

Disclaimer
Preface
Executive Summary
Introduction
Applicable References
Design Considerations
Construction Considerations
Bid Documents
Submittals from Contractor to Owner
Conclusions
Appendix

Publisher: Trenchless Technology Center (TTC), Editorial: R. Sterling (2006)

Replacement by Trenchless Method

Get access

Course name Rehabilitation and Maintenance of Drains and Sewers

A comprehensive overview of the state of technology in the area of sewer rehabilitation and maintenance with an emphasis on pipe materials and joints, defect types, causes and consequences, cleaning and inspection as well as a detailed description of the full spectrum of technologies for repair, renovation and replacement of drains and sewers.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: D. Stein, R. Stein (2004)

Renovation

Get access

Course name Static Pipe Bursting

Replacement of a vitrified clay sewer DN 300 and DN 400 using the static pipe bursting method and insertion of PE-HD pipes DA 450 and DA 500.Publisher:

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: R. Stein (2005)

Replacement

Get access

Course name Virtual Construction Site: Dynamic Pipe Bursting

Replacement of a damaged pipeline over the length of two sections, consisting of DN 300 concrete pipes, in trenchless construction using the dynamic bursting method with simultaneous insertion of a DN 300 HDPE pipe string with an outside diameter of 350 mm

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: R. Stein (2019)

Replacement

Get access