E-Learning Space

Published: Prof. Dr.-Ing. Stein & Partner GmbH (2009)

The lecture describes the two different method variants, deformation process and reduction process, as well as their areas and limits of application.

This module deals with branch connections during lining with continuous pipe.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

Lining methods for the renovation of sewers and pipes represent the largest group of renovation methods. In the case of the lining processes self-supporting full linings of sewers are produced on the basis of prefabricated pipes, locally manufactured pipes and locally manufactured and hardening pipes. The subject of this course is “Lining with Cured-In-Place Pipes (CIPP)” and “Lining with Spirally-Wound Pipes”.

In addition to the description of the procedure and process, the course deals in particular with the areas and limits of application, advantages and disadvantages as well as possible remediation errors and quality assurance options.

The course contains didactically prepared expert knowlege in 5 modules:

1. Lining with Cured-In-Place Pipes (CIPP) - basics
2. Lining with Cured-In-Place Pipes (CIPP) - Processes
3. Lining with Cured-In-Place Pipes (CIPP) - Details on the Installation of UV Cured-In-Place Pipes
4. Lining with Cured-In-Place Pipes (CIPP) - final work, acceptance, renovation defects
5. Lining with Spirally-Wound Pipes with Stationary Winding Machine without Reinforcement made of Metal or Plastic

700 € plus VAT / 2023

Lining methods for the renovation of sewers and pipes represent the largest group of renovation methods. In the case of the lining processes self-supporting full linings of sewers are produced on the basis of prefabricated pipes, locally manufactured pipes and locally manufactured and hardening pipes. The subject of this course is "Lining with Cured-In-Place Pipes (CIPP)" and " Lining with Spirally-Wound Pipes". In addition to the description of the procedure and process, the course deals in particular with the areas and limits of application, advantages and disadvantages as well as possible remediation errors and quality assurance options. The course contains didactically prepared expert knowlege in 5 modules:

• CIPP - Basics
• CIPP - Processes
• CIPP - Details on the Installation of UV Cured-In-Place Pipes
• CIPP - Final work, acceptance, renovation defects
• Lining with Spirally-Wound Pipes with Stationary Winding Machine without Reinforcement made of Metal or Plastic

Lining methods for the renovation of sewers and pipes represent the largest group of renovation methods. In the case of the lining processes self-supporting full linings of sewers are produced on the basis of prefabricated pipes, locally manufactured pipes and locally manufactured and hardening pipes. The subject of this course is "Lining with Cured-In-Place Pipes (CIPP)" and " Lining with Spirally-Wound Pipes". 

In addition to the description of the procedure and process, the course deals in particular with the areas and limits of application, advantages and disadvantages as well as possible remediation errors and quality assurance options. 

The course contains didactically prepared expert knowlege in 5 modules: 

1. Lining with Cured-In-Place Pipes (CIPP) - basics
2. Lining with Cured-In-Place Pipes (CIPP) - Processes
3. Lining with Cured-In-Place Pipes (CIPP) - Details on the Installation of UV Cured-In-Place Pipes
4. Lining with Cured-In-Place Pipes (CIPP) - final work, acceptance, renovation defects
5. Lining with Spirally-Wound Pipes with Stationary Winding Machine without Reinforcement made of Metal or Plastic

In this module, the fundamentals of the materials applied in the lining processes with continuous pipes are presented and discussed.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

This lecture is part of the series "Trenchless 101" and serves to provide an overview of rehabilitation of gas, water and wastewater pipelines.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

This module focuses on the theoretical background and the practical conditions to be observed on the subject of welding of polyethylene pipes for gas, water and wastewater pipelines. A further focus is on the requirements to be considered in quality assurance and in particular the consequences of non-compliance.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through material production and installation, right up to checking the quality achieved. It is characterized by a wide range of applications and a high variance in the fabrication and application processes. 

This module teaches the essential basics in relation to the fabrication of the lining tube and its installation.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022

The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an assured standard construction method, starting with the planning process, through the production of materials, the installation, right up to checking the quality achieved. It is characterised by a wide range of applications and a high variance in the fabrication and application processes. This module teaches essential basics with regard to the required finishing work including the taking of samples, their testing for the acceptance of the rehabilitation performance and gives an overview of rehabilitation defects and their handling.

This module requires knowledge of the modules “Lining with cured-in-place pipes - Basics” and " - Processes” as a prerequisite.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2023

The lecture describes the different method variants and systems of lining with prefabricated pipes with annular space especially the lining with continuous and discrete pipes.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2009)

The lecture describes the two different method variants, deformation process and reduction process, as well as their areas and limits of application.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2009)

The lecture deals with the method variants and the application areas of lining with spirally-wound pipes.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2009

The “lining with spirally-wound pipes” process is assigned to the group of lining processes with locally produced pipes. The characteristic of this method is the production of a spirally formed self-supporting or static load-bearing liner on-site, from factory-made extruded plastic profiles with the help of a winding machine.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2023

The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through the production of materials and installation, right up to checking the quality achieved. It is characterised by a wide range of applications and a high variance in the fabrication and application processes. This module gives a detailed overview of the installation and curing processes in lining tube. Thus, this module creates the basis for an optimal process selection within the planning process and provides essential basic knowledge for construction supervision.

This module requires knowledge of the module "Lining with cured-in-place pipes – Basics".

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022

The module "Details on the Installation of Lining with UV Cured-in-Place Pipes” is based on the ordering and installation manual SAERTEX-LINER® for gravity pipes and sewers by SAERTEX multiCom GmbH. This module describes the essential work steps, starting with site preparation, continuing with the installation of the lining tube, the curing and, finally, the essential finishing work.

Note: Specific numerical values in this module apply to products from SAERTEX multiCom GmbH and are not readily transferable to products from other manufacturers.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH in cooperation with SAERTEX multiCom GmbH / 2023

This module deals with the basic principles of lining with continuous pipe processes, as well as their terminological definitions, limiting conditions, and areas of application.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

This module introduces the method variants of lining with continuous pipes with annular space.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

This module introduces the method variants of lining with continuous pipes without annular space (close-fit).

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)