E-Learning Space

This module deals with branch connections during lining with continuous pipe.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

Lining methods for the renovation of sewers and pipes represent the largest group of renovation methods. In the case of the lining processes self-supporting full linings of sewers are produced on the basis of prefabricated pipes, locally manufactured pipes and locally manufactured and hardening pipes. The subject of this course is "Lining with Cured-In-Place Pipes (CIPP)" and " Lining with Spirally-Wound Pipes". 

In addition to the description of the procedure and process, the course deals in particular with the areas and limits of application, advantages and disadvantages as well as possible remediation errors and quality assurance options. 

The course contains didactically prepared expert knowlege in 5 modules: 

1. Lining with Cured-In-Place Pipes (CIPP) - basics
2. Lining with Cured-In-Place Pipes (CIPP) - Processes
3. Lining with Cured-In-Place Pipes (CIPP) - Details on the Installation of UV Cured-In-Place Pipes
4. Lining with Cured-In-Place Pipes (CIPP) - final work, acceptance, renovation defects
5. Lining with Spirally-Wound Pipes with Stationary Winding Machine without Reinforcement made of Metal or Plastic

In this module, the fundamentals of the materials applied in the lining processes with continuous pipes are presented and discussed.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

This lecture is part of the series "Trenchless 101" and serves to provide an overview of rehabilitation of gas, water and wastewater pipelines.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

This module focuses on the theoretical background and the practical conditions to be observed on the subject of welding of polyethylene pipes for gas, water and wastewater pipelines. A further focus is on the requirements to be considered in quality assurance and in particular the consequences of non-compliance.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through material production and installation, right up to checking the quality achieved. It is characterized by a wide range of applications and a high variance in the fabrication and application processes. 

This module teaches the essential basics in relation to the fabrication of the lining tube and its installation.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022

The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an assured standard construction method, starting with the planning process, through the production of materials, the installation, right up to checking the quality achieved. It is characterised by a wide range of applications and a high variance in the fabrication and application processes. This module teaches essential basics with regard to the required finishing work including the taking of samples, their testing for the acceptance of the rehabilitation performance and gives an overview of rehabilitation defects and their handling.

This module requires knowledge of the modules “Lining with cured-in-place pipes - Basics” and " - Processes” as a prerequisite.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2023

The renovation of sewers and pipelines with "Lining with cured-in-place pipes" is an established standard construction method, starting with the planning process, through the production of materials and installation, right up to checking the quality achieved. It is characterised by a wide range of applications and a high variance in the fabrication and application processes. This module gives a detailed overview of the installation and curing processes in lining tube. Thus, this module creates the basis for an optimal process selection within the planning process and provides essential basic knowledge for construction supervision.

This module requires knowledge of the module "Lining with cured-in-place pipes – Basics".

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH, Editorial: STEIN Ingenieure GmbH / 2022

This module deals with the basic principles of lining with continuous pipe processes, as well as their terminological definitions, limiting conditions, and areas of application.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

This module introduces the method variants of lining with continuous pipes with annular space.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

This module introduces the method variants of lining with continuous pipes without annular space (close-fit).

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

This module deals with the quality assurance of lining with continuous pipes, both with and without annular space.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH (2006)

This lecture is part of the series "Trenchless 101" and serves to provide an overview of trenchless methods for the new installation and rehabilitation of supply and disposal lines.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006

This lecture is part of the series "Trenchless 101" and serves to provide an overview of trenchless repair methods for gas, water and wastewater pipelines.

Publisher: Prof. Dr.-Ing. Stein & Partner GmbH / 2006